b8200 3pt pin size

[fatjay]

I have no idea where it went, I took off my grading blade last month to do hay trailer. I went to put on 3pt forks, and pin is gone.

I'm going to stop by TSC, but i'm not sure what size i need. I think the hole is 5/8". I think i'm going to replace both just in case.

 

[Russell King]

That is probably going to be a dealer only part…

I don’t remember why I think that but that’s what I recall.

Did you look at the vertical lift rod to see if it is in there?

 

[North Idaho Wolfman]

Are you talking about the top link (green)?
3/4"

If your talking (orange) the right side has a bolt that's not a stock setup, someone has adapted parts to it.
The hole in that arm is metric size, But you can find something in SAE that is close.

I'd be more concerned where the other lift link went???

 

[fatjay]

I got it working well enough, but it's not right. This is how i bought the tractor 10 years ago, so I'm not even sure it's right to begin with.

I assume the blue you're talking the anti sway. Tht's where they always were, but I can't get them tight enough to really take hte sway out. The bars still hit the tires.

 

[Russell King]

@North Idaho Wolfman and I are both wondering where the vertical rod between the upper and lower arm has gone to?

In this picture I highlighted it in blue and it is not in your original photo. I highlighted the other side in green which should be an adjustable link, the red at the top is the top link and is also adjustable.

This picture looks like you have some aftermarket link on the left side.

 

[fatjay]

Yes, the blue one is aftermarket. I had to take off the original one and replace it because I am missing the pin on the left side that the green one goes onto. I can't find that pin in an appropriate size.

There's 2 lift arms on the 3pt on the top of the tractor. One goes to green and one goes to the blue. The original non-adjustable link that used to be in the blue spot I took off, because the pin that the green arm goes on is missing on the left side.

I went to TSC and they had nothing. It seems to be a 5/8" though the lift arm, and 7/8" through the ball on top of the green. I also checked the parts manual, and there was nothing that matched there either.

This is what the manual shows, which is nothing like what I have.

 

[Russell King]

Okay, now it is clear that someone has just used parts to make it work. So you will probably have to use bolts, nuts and bushings to get things to fit.

Or try to get the correct (used) parts from @Mountainman at his salvage yard

Mossy Creek Outdoors - Largest Kubota B and BX Salvage Yard in the US

Find high-quality used Kubota parts at great prices! Our inventory covers everything you might need, ensuring you get reliable components for your equipment.

mossycreekoutdoors.com