b7510 rough steering problems

rbeck790

New member

Equipment
mower snow plow tiller pallett forks box blade post hole digger wagon disc
Jul 17, 2010
3
0
1
riverton,il,sangamon
hello i have a b7510 with 90 hours on machine. when the tractor is used for mowing after about 1 hour the steering gets tight, or rough kubota dealer can not find problem, has any one else experienced this thank you
 

Butch

Active member

Equipment
Kubota 2410, RC60-24B, FL1000- kubota hydrolic front snow blade- plug aerator
Sep 10, 2009
651
110
43
75
Rising Sun, MD
Dear Rbeck... I do not know how to do it but you need to go back in the archives of my posts and pull up the thread on the issues I had with my tractor. Identical to yours.... It turned out to be a design flaw and Kubota ponied up for the retrofit for the return line from the pwr steering pump to the sump.

My tractor works GREAT now.... Butch

PS drop us a line to let us know how you make out...
 

Butch

Active member

Equipment
Kubota 2410, RC60-24B, FL1000- kubota hydrolic front snow blade- plug aerator
Sep 10, 2009
651
110
43
75
Rising Sun, MD
RB.... just to let you know we had a couple of guys on here that contacted their dealer with the same problem and when the dealer was informed there WAS a solution to something they seemingly knew knowthing about they looked at the tractor owners as if they were from MARS.

Don't let them blow you off.... If you are mechanically inclined,,,, the fix is not rocket science and can be done in a couple of hours if you plan iy out and work steady. There is a parts kit specifically for the fix along with a dealer bulletin on it....

Good luck, Butch.

PS.... If per chance you are not as lucky as me in getting the kit... we can tell you step by step how to fix it yourself..
 

rbeck790

New member

Equipment
mower snow plow tiller pallett forks box blade post hole digger wagon disc
Jul 17, 2010
3
0
1
riverton,il,sangamon
guys i got great response from kubouta, they contacted dealer my unit has the updated hose going to top of trans. the dealer believes the problem was a overfilled hydraulic unit used it for over 3 hours yesterday in high heat no problems, so i hope all is repaired thanks again for all the help