B7510 Neutral and starting

[Hessmonster]

When I first got my B7510 (used) every once in a while it would not restart. I would need to hold the key to start position and move the fwd/reverse pedal until it would find the "sweet" spot and it would start and run fine. Now it won't find the sweet spot. Any ideas on how to fix this?

Thanks
Scott

 

[Billdog350]

There is a sensor for that pedal that likely needs replacement. You should be able to find it on the parts diagram for your model HST on the kubota website. Some installations are harder than others depending on the model.