B7510 loader removal

[Maverick]

I have a B7510 that is currently DO A . Safety switch issue I can't track down, therefore needs to go to the shop.

What is the easiet way to remove the loader if I have no.power ?

Thanks in advance.

 

[Russell King]

You should be able to jack up the bucket to raise the FEL off the ground, then block the cylinders to hold it up. If you are pulling it forward then run the strap under the bucket and the bucket should raise off the ground as you tension the strap.

Some have mentioned they can use the ROPS with straps to hold the bucket up.

 

[North Idaho Wolfman]

You should be able to jack up the bucket to raise the FEL off the ground, the block the cylinders to hold it up. If you are pulling it forward then run the strap under the bucket and the bucket should raise off the ground as you tension the strap.

Some have mentioned they can use the ROPS with straps to hold the bucket up.

I think he wants to remove the loader from the tractor.

 

[North Idaho Wolfman]

I have a B7510 that is currently DO A . Safety switch issue I can't track down, therefore needs to go to the shop.

What is the easiet way to remove the loader if I have no.power ?

Thanks in advance.

What is the tractor doing or not doing?
If it's not cranking there is a workaround to get it started.
If it's cranking and not starting then you have more than a safety switch issue.

 

[Russell King]

I think he wants to remove the loader from the tractor.

I think he just wants to get the tractor to the dealership and thinks removing the loader would be the easiest way to get it onto a trailer or back to his drive/barn. But maybe he does just want to remove it but I have no idea how to do that without the tractor running. Perhaps you can give him a method??

 

[North Idaho Wolfman]

I think he just wants to get the tractor to the dealership and thinks removing the loader would be the easiest way to get it onto a trailer or back to his drive/barn. But maybe he does just want to remove it but I have no idea how to do that without the tractor running. Perhaps you can give him a method??

I just get them running, it's easier than messing with a dead tractor and loader.
Otherwise just jack them up and block them.

 

[Maverick]

What is the tractor doing or not doing?
If it's not cranking there is a workaround to get it started.
If it's cranking and not starting then you have more than a safety switch issue.

Not cranking. I can hear solenoid s clicking.

I'm open to get it running.

I had to bypass the safety switch for the H ST pedal.

Worked for A few days. Now nothing.

 

[North Idaho Wolfman]

Turn the key on, put the range lever in neutral, go to the starter and jump the main battery cable to the little terminal on the end of the starter solenoid.
It should crank and start.

 

[Maverick]

Turn the key on, put the range lever in neutral, go to the starter and jump the main battery cable to the little terminal on the end of the starter solenoid.
It should crank and start.

I'll give it a shot.