I have a fully operational 1986 Kubota B7200 HST with 60 deck and 4ft front loader. My problem is that my rear rims rotted to the point they crumbled to the ground. They are no longer available. I have 31x13.5x15 turf tires. Getting the tires is not a problem. I am desperate to get rims. Any suggestions? I have called every junk yard and Kubota dealer within 500 miles of me. I would also settle for a different tread. I just want my tractor up and running again.
B7200HST rotted rims - discontinued parts ??help??
- Thread starter lubbadubb
- Start date
#7707 Carlisle MultiTrac 31x13.50-15 Tires and Rims | JM Equipment
#7707 For sale is a set of two Carlisle Multi Trac C/S tires that are 31 x 13.50 - 15 and they are mounted on 6 lug kubota style wheels that have a 6" ...
jmequipsales.com
That's the closest I could find and I'm not sure if the offset is even correct....
Also give All States Ag Parts a call. Ask if machine EQ-36823 sill has the rear rims. They are exactly what you need.
Attachments
I had a similar issue with my B9200 and determined that one of the current rear rims would work (Don't remember which); the only difference was 16mm vs 17mm bolt holes. Since I needed tires also, I ordered a tire package through sales instead of parts and was cheaper then the cost for the rims through parts.
I did a lot of research (manuals and forum) and a visit to the dealer to take measurements. I started by looking at models that had the same tire size as mine (12.4-16).
I did a lot of research (manuals and forum) and a visit to the dealer to take measurements. I started by looking at models that had the same tire size as mine (12.4-16).
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Ordering parts from the dealer sales department, through the Kubota "whole goods" system is always MUCH cheaper than ordering through the dealer parts department.
If you can't find what you want these folks can make ANYTHING wheel related, and they are very reasonable.
https://www.heywheel.com/
https://www.heywheel.com/
If you can weld, you can buy the rim and the center blank, in any width or offset you want. Millertire.com
I just purchased these for my B7200 Tractor. https://www.farmlandtractor.com/i-119292-16x5-5x6ku-kubota-wheel.html
Attachments
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
16" Rear Wheel Rim 6 Bolt for Kubota 4WD Aste B7200 B8200 GB13 GB14 GB15 Tractor | eBay
A13, A14, A15, B40, B1200, B1400, B1402, B1500, B1550, B1750, B4200, B6000, B6001, B6100, B6200, B7000, B7001, B7100, B7200, B8200, GB13, GB14, GB15. For Kubota A & B Series Tractors. Bolt Hole: 13mm.
www.ebay.com
Edit: OOPS, sorry, missed "turf" tires, my bad.
Last edited:
Your rear tires look too small. They must be 8-16's. You can tell by the way the tractor sits raked back. The rears on a 4x4 B7200 should be 9.5-16.
Attachments
GrassLakeRon
Active member
Equipment
B8200HST-DP , RC60-82h Mower Deck, Woods RB6 Rear Blade, Homemade Carry All
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com