Hello Everyone,
I have a B7200 with a front loader. Over the last year I've had some issues with the three point where it will either not work at all, work slowly, or act jerky.
Right now the three point seems to work pretty reliably when the tractor is first started but after a few minutes of running will usually become completely unresponsive under load. Sometimes when I try to lift the three point it will struggle like it's overloaded.
I've had the three point valve opened up three times this past year and have completely disassembled and blown out the valve looking for a blockage. After it put it back together it generally works okay for a little while before going back to its old tricks.
While this is happening with the three point I have no issues with the loader, and shutting the valve to the loader makes no difference. I've also changed the hydraulic fluid and filter recently.
Any ideas?
-Thanks,
Erik
I have a B7200 with a front loader. Over the last year I've had some issues with the three point where it will either not work at all, work slowly, or act jerky.
Right now the three point seems to work pretty reliably when the tractor is first started but after a few minutes of running will usually become completely unresponsive under load. Sometimes when I try to lift the three point it will struggle like it's overloaded.
I've had the three point valve opened up three times this past year and have completely disassembled and blown out the valve looking for a blockage. After it put it back together it generally works okay for a little while before going back to its old tricks.
While this is happening with the three point I have no issues with the loader, and shutting the valve to the loader makes no difference. I've also changed the hydraulic fluid and filter recently.
Any ideas?
-Thanks,
Erik