B7200 hst gear oil filter

[prgmur]

I am changing the gearbox oil on my b7200 hst. It has a canister filter under the panel in front of the seat.
Is there an internal gauze screen also on this model??? What is the oil capacity of this common reservoir?
Any help is appreciated.

 

[freewheel3]

I am changing the gearbox oil on my b7200 hst. It has a canister filter under the panel in front of the seat.
Is there an internal gauze screen also on this model??? What is the oil capacity of this common reservoir?
Any help is appreciated.

Yes there is a screen on the suction line to the pump, its like a large banjo fitting. You'll need like a 27 or 30 mm socket or wrench for it. The reservoir holds just over 3 gallons of UDT if I remember right.

 

[hodge]

Yes there is a screen on the suction line to the pump, its like a large banjo fitting. You'll need like a 27 or 30 mm socket or wrench for it. The reservoir holds just over 3 gallons of UDT if I remember right.

That screen is at the bottom side of the transmission. It will be a large diameter metal line with a banjo fitting on the end. Carefully take that out, and the screen will be on the end of the bolt.
Welcome to OTT!

 

[76_Bronco]

I am changing the gearbox oil on my b7200 hst. It has a canister filter under the panel in front of the seat.
Is there an internal gauze screen also on this model??? What is the oil capacity of this common reservoir?
Any help is appreciated.

My B7200 is a gear drive, but the filters screen should be near the same place. Mine is down below the right side of the seat, it's the bolt going through the large pipe. There is a copper washer between the tube and tranny, so be careful not to loose it. My tranny holds 3-4 gal of fluid. Sorry for the bad pic, but the bolt is partialy hidden by my fel return line.

You guys beat me to it, I'm just too slow at trying to add pic lol.