1994 B7100 HST 4x4. Yesterday when my 9 yr old grandson was driving, the forward motion on the HST pedal stuck. Fortunately he listened to instructions before driving and immediately throttled it down to stall. When I pulled up on the pedal it seems to want to slip inward. The lubrication zert is well lubed, but it feels like something may have worn out or come loose that keeps the pedal pushed out from the frame. There is a little play if you pull the pedal in and out sideways. You can bring it back to neutral by lifting it back up, but if your in motion it disengages too fast and about throws you off.
Another question. I understand the mechanics of the cooling system but just would like to know if there is an aftermarket water pump, inline pump, or some other secret to circulating the water. I use it in NW Florida and it gets pretty hot here. I've pulled the radiator, flushed, replaced hoses and belt. I'm thinking about maybe an auxiliary electric fan in front of the radiator.
1994 B7100 HST 4x4
Last but not least. When looking in the parts manual I can not determine which wire harness is the one I need. The plug connector, has about 9 wires or so, located behind the dash, lower than the ignition switch has come apart with age. It is a white plastic plug. I'm looking to replace the harness but the manual just states harness 1, harness 2 etc...
Any help greatly appreciated.
This little tractor is an absolute beast and has made up my mind that if I ever replace it, it will be another Kubota.
Another question. I understand the mechanics of the cooling system but just would like to know if there is an aftermarket water pump, inline pump, or some other secret to circulating the water. I use it in NW Florida and it gets pretty hot here. I've pulled the radiator, flushed, replaced hoses and belt. I'm thinking about maybe an auxiliary electric fan in front of the radiator.
1994 B7100 HST 4x4
Last but not least. When looking in the parts manual I can not determine which wire harness is the one I need. The plug connector, has about 9 wires or so, located behind the dash, lower than the ignition switch has come apart with age. It is a white plastic plug. I'm looking to replace the harness but the manual just states harness 1, harness 2 etc...
Any help greatly appreciated.
This little tractor is an absolute beast and has made up my mind that if I ever replace it, it will be another Kubota.