I picked up an old B7100 the other day. The owner had removed the loader but I got all the pieces and have put it back on. I'm having trouble with the lift cylinders. They don't seem to have enough power to lift the bucket. If I hold the bucket cylinder selector back all the way and then raise the lift arms it will lift. Doesn't make much sense. I've already swapped hoses between the spools thinking something might be wrong with one of them but it's still the same. Thinking now that there might be a blockage in the lines. Filter screen is clean.
B7100 Loader
- Thread starter RS16017
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
It still sounds like you don't have the plumbing setup right on it.
Like maybe an in line is on an out port.
Like maybe an in line is on an out port.
