B6200D Tansmission oil change

Groose

New member

Equipment
B6200D
Jun 12, 2015
18
0
1
Bridgwater UK
Hi All,
Am doing my first B6200D service and have a question on the transmission oil change.
I removed plug from transmission case and oil strainer opposite. I could not find any other plugs or filter, do they exist?

After clearing out strainer of filings I refilled oil, my book states capacity is 13.5litres, yet I only put in 8 and it is full and seeping out of gear shift and other places.

What have I done wrong?:confused:
 

mickeyd

Active member
Lifetime Member

Equipment
2014 L3200 DT w/LA524 FEL, 2019 Kubota Z121S w/ 48" Pro Dec, TG1860G w/RCK54TG
Mar 21, 2014
1,192
18
38
Guin, AL
Welcome to OTT Groose. I do not have that model so I can't help but Wolfman and others here can.
 

CJN8

New member

Equipment
B2650HSD, LA534 FEL, Gearmore Box Blade, Bush Hog, Cimmeron Rake
Nov 16, 2013
122
0
0
San Diego, CA
When you drained the transmission did you remove all three drain plugs?
 

Groose

New member

Equipment
B6200D
Jun 12, 2015
18
0
1
Bridgwater UK
Thanks for your reply.
I can only see one plug opposite to the strainer at base of transmission case. Where are the others?
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,162
6,610
113
Vilonia, Arkansas
Should be two on the rear axle. One on the drive housing by each tire