b6100 pricing?

[firemanbill]

new member here,
need advice on a tractor i have, it is a b6100 2wd with new tires front and rear, 192 hrs, diesel, looks okay -not perfect but runs perfect. after beating my head against the wall trying to figure out what i can use it for i am coming up empty. i have the belly mower for it and a 3' rear scraper blade for it also. i got this from a guy that bought it new and used it to cut a 10 acre pasture with it. after 2 hot summers, he decided he wanted something bigger to get the job done faster. the b6100 went under a tree and was forgotten about......
i did some work for the guy and he gave me the tractor, i was pretty excited.
i changed all the fluids, put new tires on it and dragged the belly mower out of the brush. mower deck spins perfectly but is missing the electric clutch and shaft off front of engine to run it. pto works and 3 pt works good also. tractor mechanically is in great shape, paint is faded though.
what would this be worth if i was to sell it? hour meter is showing 192 hrs on it.
thanks for any advice.
bill
p.s.- on the transmission there are these numbers stamped on right side
b6001e-18726

 

[D2Cat]

I don't see where you mentioned the engine is working OK. The hours are extremely low for a B6100 since they were last made in 1984.

I would not try to hook up the belly mower. They were more trouble than they were worth, in my opinion. For mowing a 3pt rear finish mower is easier, and much more practical. A 3' rear blade, must be a misprint...surely it's 4', or it's a hacked up job!

After you have 5 post you can then post pictures on this forum. Show us some pictures.

A clean b6100 that runs good, even 2 wheel drive is worth $2000-$2500 and no implements.

 

[dlundblad]

How many places is the hour meter? A 3 place hour meter will just roll over once it hits 1000 hrs.

I agree with D2Cat. 2-2.5k is very fair. Might even start asking for 3k.

 

[Carl in France]

Never believe an hour meter.