B6100 front end loader hydraulics

[torch]

Ok so I have done some more research and have some more questions. When plumbing the hydraulics I add the diverter block that runs fluid from the pump through the loader controls and then to the 3pt hitch, when I plumb from the valve back to the 3pt hitch does that need to come from the open center for the power beyond? Also where is the best way to put the return into the tank?

Tractor pump -> FEL supply port
FEL Power beyond port -> 3ph
FEL Tank port -> hydraulic oil fill opening. Requires 1/2" pipe nipple and tee.

 

[Dave_eng]

forum member White tiger provided the attached pages which includes part numbers for the block cover and the Tee for the return.

Dave