B6000 Air Filter Damper

B

Brogan

New member

Equipment
Kubota B6000
Sep 5, 2025
4
0
1
Santa Barbara
So I’ve been scouring the threads on here but couldn’t find anyone who knew about this part.

I recently bought a working B6000 from a neighbor. As I was going through the maintenance, I noticed the air filter had no oil in it. I was about to add some up to the line when I realized it’s missing this piece. I feel like I could make one from plastic but I’m also worried I won’t have the exact dimensions right. If anyone has one, could you please tell me the top diameter, bottom diameter, bottom recess diameter, depth of recess, total height, and number and diameter of holes on the bottom

IMG_3279.png
 
R

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
6,637
2,203
113
Austin, Texas
R

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
6,637
2,203
113
Austin, Texas
Well if you don’t get any dimensions I would not worry too much about making it exactly like the original one. I assume since it’s name is damper all it is doing is slowing down the oil movement inside the cup of oil so the air always must pass through some oil.

Good luck!
 
B

Brogan

New member

Equipment
Kubota B6000
Sep 5, 2025
4
0
1
Santa Barbara
Russell King said:
Well if you don’t get any dimensions I would not worry too much about making it exactly like the original one. I assume since it’s name is damper all it is doing is slowing down the oil movement inside the cup of oil so the air always must pass through some oil.

Good luck!
Click to expand...

Thanks. I found this image on one of the other threads. I think you are right. Looks like it does not make a seal with the oil pan as there is a 1/8in gap all around. I guess anything in there that’s close is better than nothing
 

Attachments

You must log in or register to reply here.

Top Bottom