We got a B3030 with 400 hours on it. The trans & hst oil and filters has not been changed since the 50 hour service (or so we were told). I got the two filters, 5 gallons of very expensive hydraulic oil and a operator manual from the dealer. Can someone point out where these three drain plugs are? The illustrations in this manual are absolute crap. I think it's pointing at a plug at the very bottom of the mid-pto? I can't find the other two. I have a guess what they are but not for sure. Anyone have a better pic?
So do I just drain, swap filters, fill and go? I wasn't sure if I needed to preload oil in the filters before installing. I really don't feel very confident about this after reading this manual. I don't know if it's just poorly converted to English or bad to start with. The manuals for my other color tractors seem much more detailed. I couldn't find a video on the net so I thought I would ask here. Good forum! Thanks for the help!!
So do I just drain, swap filters, fill and go? I wasn't sure if I needed to preload oil in the filters before installing. I really don't feel very confident about this after reading this manual. I don't know if it's just poorly converted to English or bad to start with. The manuals for my other color tractors seem much more detailed. I couldn't find a video on the net so I thought I would ask here. Good forum! Thanks for the help!!