I just purchased a B2920 and in the manual it states that the 3PT Hitch can be raised or lower in 1/4" Increments, but when I tried this the 3 pt or the MMM did not move at all.
The manual states the following "The lever position (C) enables you to control the valve with ease in increments of approximately 1/4 inches at the lower link end."
Can anyone provide me any insight on how to properly use or adjust this function.
Thanks,
Joe
The manual states the following "The lever position (C) enables you to control the valve with ease in increments of approximately 1/4 inches at the lower link end."
Can anyone provide me any insight on how to properly use or adjust this function.
Thanks,
Joe