B2650 Cab Door removal
- Thread starter Dae06
- Start date
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
I'd like to know as well. I love having the A/C, but If I could take the doors off easily, I wouldn't need to use air as much.
Orange1forme
Active member
Equipment
B2650 HSDC, filled tires, wheel spacers, B2728B , LA534A FEL, 3rd valve kit
I looked into this on mine a few months back. It seemed quite simple from what I remember.
Looks like you remove the door "shock". Use the top but to unscrew/raise the "shock" out of the mount on the fender.
As I recall, the doors come off like a standard interior door, remove the pins. I could be wrong as it has been awhile. There is a C clip on the bottom of the pin, remove it first.
Take a quick look and it should be pretty easy to figure it out.
Looks like you remove the door "shock". Use the top but to unscrew/raise the "shock" out of the mount on the fender.
As I recall, the doors come off like a standard interior door, remove the pins. I could be wrong as it has been awhile. There is a C clip on the bottom of the pin, remove it first.
Take a quick look and it should be pretty easy to figure it out.
Last edited: