B2650 Box Blade

[Gadget]

What size box blade are you folks using with your B2650? The manual says a max width of 54 inches and weight of 500 lbs. The rear width of my tractor, with turf tires, is 60 inches (5 ft). I’m leaning toward buying the 5 ft box blade vs. the smaller 4 ft model. My place is mostly dirt with roots but not a lot of rocks.

 

[mickeyd]

You should be able to use the 60" BB. You may have to take it slow and not go very deep for each pass, but it should work fine.

 

[stevea]

go to kubotausa\.com
look at the B2650 'implement' link.

(see docs/default-source/lp-pdfs/02-b-series-lp-implements.pdf)

Kubota owns Landpride, so they now have a compatible implement sheet.

For the B2650 it shows boxblades to 66". The BB1266 an BBB1566 for example.

I just ordered a BB1560 fwiw.

 

[pauly]

I have the B2650 and use a 60” box blade and a 60” grading scrapper, no issues.

 

[ItBmine]

Your B2650 will easily pull a 60 inch. I pull a 60 inch loaded up hills with my B2620 and it is lighter.

You can see pics here of the hills and terrain I box blade.

http://www.orangetractortalks.com/forums/showthread.php?t=34775

 

[Ezlife45]

My dealer sold me a 4' box blade and I would have preferred a 60"

I have a B2650 too.

 

[Gadget]

Thanks for the feedback.....I will be buying the 60 inch box.

 

[precisionbike]

I dug this pond with my B2601 and a 60” box blade. At one point I had to drop the grade by 36”. Now my wife wants a bigger and deeper pond. I may need a backhoe now. [emoji4]


Sent from my iPhone using Tapatalk