B2410 in a Nugent General Purpose G2512-2?
- Thread starter Laurie
- Start date
NCL4701
Well-known member
Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Never heard of a Nugent so looked it up.
www.barkleygreen.co.uk
Didn’t see a weight rating anywhere but hard to imagine a tandem axle of any sort couldn’t handle your B from a weight perspective. Past that, it’s measure the tractor and see if it fits in the 8’2” x 4’2”.
Biggest issue I see is that swell gate at the back means you can’t have anything hanging off the back of the trailer at all, so that 8’2” is tractor and any implement on the back. If you have a loader you may be able to hang part of it over the front if local laws and your tow vehicle allow.
So:
Nugent G2512-2 General Purpose Trailer With Mesh Sides for sale
Nugent G2512-2 General Purpose Trailer With Mesh Sides for sale, Trailers, Nugent
Didn’t see a weight rating anywhere but hard to imagine a tandem axle of any sort couldn’t handle your B from a weight perspective. Past that, it’s measure the tractor and see if it fits in the 8’2” x 4’2”.
Biggest issue I see is that swell gate at the back means you can’t have anything hanging off the back of the trailer at all, so that 8’2” is tractor and any implement on the back. If you have a loader you may be able to hang part of it over the front if local laws and your tow vehicle allow.
So:
- No I haven’t put that tractor on that trailer.
- It might fit if it’s just the tractor. Measuring your specific tractor is the best way to answer that question.
- If it’s tractor + loader and/or + rear implement, that 8’2” length is going to get real short real quick. Suspect you’ll find it too short for much more than the tractor itself if it’s even long enough for that.
NoJacketRequired
Active member
Equipment
B7510 & LA302 FEL & B2782 blower, B7510 & B2781 blower, B2410 & B2550 blower
You would have to step the wheels in quite narrow to get it to fit width-wise. It would be tight length-wise, too. When I moved my 2410 I used a 6x12 trailer and it just fit, but of course that was with a box blade on the back.
Basic tractor weight is about 1400lbs but the implements and accessory weights add up quickly. With the front mount blower and box blade it's within a hair of a ton from what I saw on the highway scales (I think I read them correctly...).
Basic tractor weight is about 1400lbs but the implements and accessory weights add up quickly. With the front mount blower and box blade it's within a hair of a ton from what I saw on the highway scales (I think I read them correctly...).
It has a 2000kg (4400lb) rating so weight isn't the issue. The dimensions are very tight but just about work! Plus it gives me a general-purpose trailer, on two axles which is very maneuverable. Overall, quite happy with it!Never heard of a Nugent so looked it up.
Nugent G2512-2 General Purpose Trailer With Mesh Sides for sale
Nugent G2512-2 General Purpose Trailer With Mesh Sides for sale, Trailers, Nugent
Didn’t see a weight rating anywhere but hard to imagine a tandem axle of any sort couldn’t handle your B from a weight perspective. Past that, it’s measure the tractor and see if it fits in the 8’2” x 4’2”.
Biggest issue I see is that swell gate at the back means you can’t have anything hanging off the back of the trailer at all, so that 8’2” is tractor and any implement on the back. If you have a loader you may be able to hang part of it over the front if local laws and your tow vehicle allow.
So:
- No I haven’t put that tractor on that trailer.
- It might fit if it’s just the tractor. Measuring your specific tractor is the best way to answer that question.
- If it’s tractor + loader and/or + rear implement, that 8’2” length is going to get real short real quick. Suspect you’ll find it too short for much more than the tractor itself if it’s even long enough for that.