Bought a used B2400 about a year ago. The 3pt system has always seemed tempermental and had to decide if it wanted to raise or not. Now I get no response at all. (No noise, no movement, no nuttin').
If all else fails, read the book. So broke out the service manual and in the troubleshooting section, it suggests that the position control valve needs replaced. Problem is I really don't have $500 to replace that assembly.
Manual doesn't describe how to further disassemble the valve assembly. So it seems I have two options... 1) Hope that the valve is OK and something else is causing the problem. 2) Try to take apart the valve myself and see if I can figure out what's wrong.
Any suggestions?
If all else fails, read the book. So broke out the service manual and in the troubleshooting section, it suggests that the position control valve needs replaced. Problem is I really don't have $500 to replace that assembly.
Manual doesn't describe how to further disassemble the valve assembly. So it seems I have two options... 1) Hope that the valve is OK and something else is causing the problem. 2) Try to take apart the valve myself and see if I can figure out what's wrong.
Any suggestions?