B2150 3 point hitch kit source

[kbrothers]

Where do I get a 3 point hich kit for a B2150 HST? The backhoe is off and have got spring fever A few on E Bay but can,t find one for this tractor What are my options? Thanks

 

[Eric McCarthy]

Your best bet is go to the dealer and get the correct hitch that fits, yeah its a wee bit pricey but you can't go wrong with an OEM fitment.

 

[BadDog]

Your best bet is go to the dealer and get the correct hitch that fits, yeah its a wee bit pricey but you can't go wrong with an OEM fitment.

Either that or get lucky with one of the bone yards. I've had no luck at all there. If they had it at all, it was over priced BEFORE shipping was considered. For instance $200 for a B7100 hood that was really beat so bad I wouldn't have been happy at $100 locally, though it would have been better than mine. But if I'm not mistaken, the same 3 point parts are used on quite a few of the Kubota CUTs, so you may have more luck and still save a few bucks. Good luck.

 

[Lil Foot]

I'd stay away from the ones on ebay from India… there was a recent thread here about all the cutting, bending & welding needed to make it useable, and my neighbor had the same experience with his India made 3pt for a B2150.

 

[North Idaho Wolfman]

Try this place: West Kentucky Tractor Parts.
http://wkytpstore.com/

 

[kbrothers]

West Kentucky has after market kit My dealer would have to sell individual parts, told me to find aftermarket kit So can anyone with a hydro B2150,B8200 or B9200 get me tho over all length and hole to hole centers on the lower lift arms please on their three point Thanks

 

[BadDog]

Hydro shouldn't matter, though someone can refute if I'm wrong.

I have a B2150D (gear, 4wd, TLB) that I can get any measurement you need off of.

 

[kbrothers]

Thanks BadDog I,d really appreciate it

 

[BadDog]

Hole to hole center length on mine is 25". I didn't get over all length, but it's the hole length that would matter. If you want the over all I can get that too, or any other measure you need.

 

[kbrothers]

Thanks a million Russ Will go with that Ken

 

[Eric McCarthy]

I'd have to agree with BadDogs first statement that any hitch from a compact Kubota should fit.

 

[lsmurphy]

I'd stay away from the ones on ebay from India… there was a recent thread here about all the cutting, bending & welding needed to make it useable, and my neighbor had the same experience with his India made 3pt for a B2150.

Two of our KUBOTA dealers......yep......that's right.......DEALERS, sell them.

I have the lift links from India.......most top links are from India.


Get used to it.

I'll bet the OEMs are Indian too.

 

[BadDog]

Anyone still looking? Just stumbled across these. No association.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=351100500050&ssPageName=ADME:B:SS:US:1123