b2100hsd, 4wd

Shadetree605

Active member

Equipment
kubota b2100
May 1, 2022
213
102
43
north little rock, ar
Hi, can someone that has or had a b2100hst , 4wd, give me some advice on the power steering break down on how the parts go back together ?. i know where to look at messicks, i can do this, my problem i am having is one of the o-rings # 120 in this break down --> Kubota B2100HSD (Hydrostatic Transmission, 4wd) Parts Diagrams (messicks.com) for H11502 shows me the o-ring, but i see no way of getting the bottom screw part to go down into the cylinder with this o-ring not having any room ?!. what gives ? am i missing something ?.
 

Shadetree605

Active member

Equipment
kubota b2100
May 1, 2022
213
102
43
north little rock, ar
ok, after looking over a wsm ( thank's to whoever posted the link ! ), i see where this o-ring goes now !. it say's it goes UNDER the teflon seal ?, in order to get this seal off, the wsm say's to cut it ?, yeah, gonna do a hard pass on this, as i do not , or did not order i new one to replace this. sooo..i'll just put it back together the way it is, and leave this o-ring out for the time being.