The alternator locked up and was not spinning while the tractor was running.
Took it apart and the bearing toward the front was broke.
Installed new bearing and remounted alternator.
It will now spin freely but there is no voltage output.
While it was apart the coils looked good. And the resistance reading across the coils was 0.4 ohms.
Where did the output go?
Took it apart and the bearing toward the front was broke.
Installed new bearing and remounted alternator.
It will now spin freely but there is no voltage output.
While it was apart the coils looked good. And the resistance reading across the coils was 0.4 ohms.
Where did the output go?
