Can't seem to find my manual, but not certain the info I'm looking for is in it. Can someone tell me where to find the power beyond port on my B-3000? A picture would be worth 1,000 words!
B-3000 power beyond port location
- Thread starter blenderbender
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
TAA DAA....
But it depends on what your doing with it?
And whether you have a FEL attached or not.
Hooking the wrong type of valve to this, will blow the pump.
So not a cut and dried taa daa!
But it depends on what your doing with it?
And whether you have a FEL attached or not.
Hooking the wrong type of valve to this, will blow the pump.
So not a cut and dried taa daa!
Attachments
Thanks!!! I do have an FEL and I'm going to add a 3rd function kit for grapple. The instructions show the following:
the image didn't upload apparently.... I'll need to sort that out.Thanks!!! I do have an FEL and I'm going to add a 3rd function kit for grapple. The instructions show the following:
Having trouble uploading image of installation instructions. What it basically says is "connect hydraulic hoses to appropriate port locations (on manifold). Pump supply from power beyond port of loader valve to port "P" of supplied manifold." So I guess my question should have been where is the power beyond port on the loader valve?
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
..... many thanks!!!