as requested, SSQASPSBversion1.0

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,405
4,901
113
Greensville,Ontario,Canada
Here's some quick pictures of the SkidSteerQuickAttachSelfPoweredSnowBlower version one point zero
Yes mtg plate is 1/8" checkerplate...
Engine is 14HP, has electric PTO
chutes chained together, yes 360 rotation.....
'work-in-progress'...
 

Attachments

  • Like
Reactions: 4 users

PaulR

Well-known member

Equipment
BX 23S -- 100 hours seat time so far
Aug 3, 2020
579
459
63
Hadley, MA
DIABOLICAL!
I cannot express how awesome this is.
You sir, have won the internet for the month.
I may even have to facebook share these pictures! 🤣
 
Last edited:

Ikc1990

Active member

Equipment
Kubota m125x, m9000, b2710, and other equiptment
Dec 2, 2020
292
130
43
Vermont
How much did that setup cost you... priceless....
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,405
4,901
113
Greensville,Ontario,Canada
Less than $500 as old snowblowers, E-PTO were free, Princess Auto supplied the engine,sprockets,chain,etc. All steel from 'dumpster diving'(with owner's permission).
Kinda hoping it actually snows this winter to see how well it works....
Version 2.0 is 'on the books' but need to make a 'toe jack'..forklift rear tire is flat...sigh...
 
  • Like
Reactions: 1 user

leveraddict

Well-known member

Equipment
2017 BX23S 60" LP BoxBlade 54" mower 60" BackBlade EA 12" 1 bottom plow & Forks
Apr 1, 2019
907
589
93
NEPA
That is freaking awesome! :cool: Thanks for the pics! I see snow blower #3 in the pic. Thinking of adding another one?
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,405
4,901
113
Greensville,Ontario,Canada
That's the BERCO 40" freebie that should become version2.0. Guy used it 2-3 times, didn't like it. ZERO wear,almost 'BNIB'. It's complete,ready to bolt onto a Craftsman rider. Will need to fab two 'collector wings' to make it +-50" wide.....
 
  • Like
Reactions: 1 user

Chanceywd

Well-known member
Lifetime Member

Equipment
Kubota L2501DT BH77 VIRNIG URG60-CT 1950 8N
Mar 26, 2021
603
465
63
central ny
That is quite a nice unit Jay! Definitely got me thinking about what I could do here.

Thanks for taking the time to post this.

Bill
 

Hkb82

Well-known member

Equipment
M7060, Ford 5600, can-am defender
Nov 17, 2021
387
312
63
42
Ontario Canada
Great work so far hope to see a video of it throwing some snow soon.
 

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,781
2,965
113
North of Pittsburgh PA
chutes chained together, yes 360 rotation.....
That's really creative thinking. Like everybody else, I love it.

AND if you overheat due to the excitement of using your creation, you can even rotate the chutes back at you and cool off quickly!

But you probably have a cab too...so no luck there...

Great job!
 
  • Like
Reactions: 1 user

Ikc1990

Active member

Equipment
Kubota m125x, m9000, b2710, and other equiptment
Dec 2, 2020
292
130
43
Vermont
That's really creative thinking. Like everybody else, I love it.

AND if you overheat due to the excitement of using your creation, you can even rotate the chutes back at you and cool off quickly!

But you probably have a cab too...so no luck there...

Great job!
But if hes got one of them fancy cabs with roof hatch he can fill cab up till hes cooled off hopefully it's not water tight or hopefully he remembers the drain plug lmao