I am a novice at this tractor work so I keep bumping into questions that are probably obvious for you veterans.
I am ready to pull the engine in my L35 so I can get moving doing the rings and gaskets. I can only find one anchor point on the engine which seems odd to me.
I have attached some pictures of the anchor. It is pretty obvious.
Does anyone know if this is the only point I should use to attach the hoist? It seems like there should be another point or two on the engine where I would connect some chain and then hoist.
I welcome any and all advice for this next stage of pulling the engine and detaching the front/rear of the tractor from it.
I am ready to pull the engine in my L35 so I can get moving doing the rings and gaskets. I can only find one anchor point on the engine which seems odd to me.
I have attached some pictures of the anchor. It is pretty obvious.
Does anyone know if this is the only point I should use to attach the hoist? It seems like there should be another point or two on the engine where I would connect some chain and then hoist.
I welcome any and all advice for this next stage of pulling the engine and detaching the front/rear of the tractor from it.
Attachments
-
80.9 KB Views: 186
-
94.5 KB Views: 188
-
95.1 KB Views: 179