Has anyone added on Hydraulics? I just got an old L3750DT. It just has two hydraulic hoses going to the FEL. I was looking for some advice on how difficult it is to add a set out the back so I can disk with this tractor.
There is a kit you could get to do just that, But they are usually very pricey.
It would be Kit L8411.
But you could very simply just add a longer line from the return of the loader spool valve to a new open center spool valve and then back to the hydraulic block.
There is a kit you could get to do just that, But they are usually very pricey.
It would be Kit L8411.
But you could very simply just add a longer line from the return of the loader spool valve to a new open center spool valve and then back to the hydraulic block.
That pretty much says it.
My dealer charged me $500 for a 6' hose, 3/8" Dixon QD set, and an inline mounting bracket. I'm pretty sure he used the original return hose from the FEL bsck to the manifold for the return. Save yourself 3 or 4 hundred bucks.
I added rear remotes to my L3000. Took the supply line for the loader and hooked it to the intake side if the remote valve. Came out of the remote back to the loader. When the remotes aren't in use the loader works as normal. Unless you have 3 hands you can't drive, work the loader and work the remotes at the same time so all is good.