3 point trailer hitch

[Bearcatrp]

Looking for a trailer hitch for my 1880. Front has option if I remove my forks. But want one for the 3 point. Looking at these and wanting opinions. Mostly boats or trailers will be moved. The $45 doesn't look to bad for the cost but you get what you pay for. If you have a suggestion on another one, willing to listen. Thanks

Amazon.com

Amazon.com

 

[Bearcatrp]

Just checked my 3 point quick attach. Need 27 1/2 max for the frame. Guess the ones I posted won't work. Found this one. Looks like it will work.

https://www.amazon.com/Sulythw-Receiver-Equipment-Standard-Trailers/dp/B08BFMGXBV/ref=asc_df_B08BFMGXBV/?tag=hyprod-20&linkCode=df0&hvadid=693517854140&hvpos=&hvnetw=g&hvrand=1067341498553503116&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1019769&hvtargid=pla-943097783506&psc=1&mcid=112383c7317b39ae8596d6357d352f0f&gad_source=1

 

[GreensvilleJay]

curious as to why those 1st 2 won't work as they're both CAT1, same as your tractor.
2ns one even says BX compatible...

 

[Bearcatrp]

Not wide enough. Shows 27.63 end of pins. My quick attach is 27 1/2 before pins. That last one is the closest so far but am still looking.

 

[GreensvilleJay]

OK, that explains it....non conforming 'CAT1' quick hitch !

 

[nbryan]

Another 'zon for a CAT 1 3-point, I use a lot on my B2650:

Amazon.com

They indicate 27" outside pin to pin.

 

[GeoHorn]

Something I”m not understanding…. a 3 pt hitch that cannot accept an attachment which measures this:..??

 

[FTG-05]

I built one for my tractor probably 10 or more years ago. Never used it. It was far easier to just add a receiver hitch to my box blade:

If you want mine, come get it! I65 near the AL/TN border.

 

[GreensvilleJay]

The problem I see is that his quickhitch is CAT1 on the tractor side, CAT2 or 3 on the IMPLEMENT side !!!

 

[GrumpyFarmer]

Not wide enough. Shows 27.63 end of pins. My quick attach is 27 1/2 before pins. That last one is the closest so far but am still looking.

Good day.

I am not sure I am following the thread / purpose correctly, but I wonder have you tried longer pins?

 

[DustyRusty]

Buy an old trailer hitch from a car or truck, cut it up, and make your own. This is what a friend did for me, and I bought a pickup truck hitch for $5 at a swap meet. Unfortunately, it isn't wide enough for my quick hitch, it will soon be remedied with some added steel to each side to move the pins outboard.

 

[GreensvilleJay]

The other solution is to buy or make a proper 'quick hitch'. One that IS CAT1, tractor side AND CAT1 implement side.

 

[JimDeL]

The other solution is to buy or make a proper 'quick hitch'. One that IS CAT1, tractor side AND CAT1 implement side.

And then add one of these to it:
5000 lb. Step Bumper Receiver (harborfreight.com)

 

[Bearcatrp]

Something I”m not understanding…. a 3 pt hitch that cannot accept an attachment which measures this:..??

View attachment 131214

Looks similar to the one I posted above. The one here will work. Got a link to this one?

 

[Bearcatrp]

OK, that explains it....non conforming 'CAT1' quick hitch !

The one I bought was from Titan.

 

[Bearcatrp]

Just checked my 3 point quick attach. Need 27 1/2 max for the frame. Guess the ones I posted won't work. Found this one. Looks like it will work.

https://www.amazon.com/Sulythw-Receiver-Equipment-Standard-Trailers/dp/B08BFMGXBV/ref=asc_df_B08BFMGXBV/?tag=hyprod-20&linkCode=df0&hvadid=693517854140&hvpos=&hvnetw=g&hvrand=1067341498553503116&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1019769&hvtargid=pla-943097783506&psc=1&mcid=112383c7317b39ae8596d6357d352f0f&gad_source=1

Just a FYI, this one works perfect for my quick attach. Fits like a glove.