3 point sway/stabilizer chains

primerk5

New member
Mar 4, 2013
43
0
0
Maryland
Any one use these?



Ebay Link

One of mine has been broken for a very long time. I haven't measured mine to see the length differences. And I can't find any information about the eyebolt thread diameter or the pin diameter so that i know if these will bolt in without modification.
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,795
2,602
113
Bedford - VA
Any one use these?

[IMG....jpg /IMG]

Ebay Link

One of mine has been broken for a very long time. I haven't measured mine to see the length differences. And I can't find any information about the eyebolt thread diameter or the pin diameter so that i know if these will bolt in without modification.

You ought to chat with HODGE here on the forum - he makes a fantastic sway/bar/stabilizer for darn near any tractor before you buy those;)

I think once those chains/turnbuckel get some wear on them, and a little rust - it will be just like a unmovable turnbuckle...... a royal PITA.
 
Last edited by a moderator:

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,275
6,892
113
Vilonia, Arkansas
I second chatting with Hodge :D I had a set of those chain stabilizers on my tractor. One was froze solid. So everything kept hitting the tires. When I repainted it, I contacted hodge and ordered a pair of his stabilizers. What a huge difference it made. Just pull a pin and slide it to where you need it :D:D

 

olthumpa

Active member
Lifetime Member

Equipment
L275
May 25, 2011
1,501
4
38
Maine
I agree with getting Hodges stabilizers. It was the best money I have spent on the tractor. They make hoking up impliments allot easier and are they are allot stronger.
 

hodge

Well-known member
Lifetime Member

Equipment
John Deere 790 John Deere 310 backhoe Bobcat 743
Nov 19, 2010
2,907
459
83
Love, VA
What model tractor do you have? I could tell you what length you would need, and the eyebolt diameter is 5/8", across the model board.
 

I C Bonz

New member

Equipment
2014 BX25D, B2789
Feb 14, 2015
25
0
0
Emsdale,On. Canada
Installed my hodge product just the other day finally.
Took about 15 mins start to finish!
Huge difference with the blower on back, HUGE.
Best money I've spent on the tractor.
PM Hodge and put an order in.

Jake
 

TripleR

Active member

Equipment
BX2200, BX2660, L5740 HSTC, M8540HDC and some other tractors and equipment
Sep 16, 2011
1,911
8
38
SE Missouri
Get some from Hodge, I bought two sets and love them.
 
Last edited:

RonBoyBX25D

Member
Lifetime Member

Equipment
B2650, LP Grapple, Bro-Tek spacers, QH, Box Blade, Landscape Rake, RB, and 1560G
Aug 1, 2015
477
3
18
Minneapolis, MN
I took the advice after the first time putting the 3pt on my BX25, glad Hodge made up a set for me.