3 Point Quick Attach for Rear Mounted Grapple?

Stitchit1

Member
Jul 27, 2014
170
2
18
Cheboygan, Mi
Has anyone ever done or seen this done? I’m looking to possibly mount a quick attach off a 3 point for picking up heavy boulders and rocks. Is this possible? I’d think anything is, but I have yet to see it.... I see where there is a “mechanism” that allows for quick”er” attaching, but not the actual one with the handles that lock down into the implement.

What are your thoughts? Doable? What is the comparison ratio of a fel vs 3 point as far as lifting capacity?

Thanks!
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,421
4,908
113
Greensville,Ontario,Canada
I made a 'carryall' for my A-C D-14 back in '99, using 48" forklift forks. It'll get under BIG logs and carry them. Really big ones give me 'power steering' ! Big ones are 1200-1600#... BTW a cubic foot of 'rock' is about 150#, more or less...
 
Last edited:

BigG

Well-known member

Equipment
l2501, FEL, BB, Rotary cutter, rake,spreader, roller, etc. New Holland TL80 A
Sep 14, 2018
1,951
770
113
West Central,FL
Buy a set of pallet forks that can be used on the 3 point hitch. Add a hydraulic top link so can get some down angle to the forks to get under the rock, tilt up to carry said rock. You should be able to carry some good sized rocks. The store bought carryalls that I have seen are not stout enough to carry a heavy load.
 

BigG

Well-known member

Equipment
l2501, FEL, BB, Rotary cutter, rake,spreader, roller, etc. New Holland TL80 A
Sep 14, 2018
1,951
770
113
West Central,FL
Everything attachments has a good looking set. Long forks to get under the rock and rated to 3000 lbs. If you have the ability you could adapt the FEL forks. Are they quick attach? If so they make a quick attach to fit on the 3 point hitch so you could use your FEL forks.
 
Last edited:

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,212
6,384
113
Sandpoint, ID
Hi Sean! You could very well have, and i completely forgot..... thank you for resending! Do you feel these would be decent as far as strength goes?
Yea they look like they would do what you want to do with it. ;)