3 point lever adjustment

[Tooljunkie]

Hey, did a brief search and i dont see anything relevant.
My L1501 lever drops.
As i raise implement its normal as soon as i let go of lever it moves on its own,downwards.
Is there a tension adjustment for the lever,i see a double nut but dont want to start poking around blindly and cause other issues.
Thanks in advance.

 

[Roadworthy]

The height control lever on your three point hitch should stay where you put it. There may be a mechanical friction adjustment under there. My PTO lever didn't want to stay engaged but a bit of lubrication solved that.

 

[North Idaho Wolfman]

Yes loosen the nuts up and tighten the inside one a little till if feels good then lock it in, if it won't get tension on it, replace the 2 spring washers under the nut.