3 hydraulic questions

[Greg]

This goes out to anyone who may know the answer...

1. Does anyone know the thread size on the hydraulic block on the B7100 HST-D? I'm sure it's the same as the D6100 and D5100.

2. I am mounting a loader and plan to feed the control valve from the hydraulic block. Does any know the best place to connect the return line? and would that be low pressure?

My user manual makes reference to a "plug on the case front cover" where do I find this? Can't find this terminology in my shop manual.

Thanks.

 

[handyman]

Greg I have a b7100 hste dont know if same. Mine is located on frame on right side(setting in seat) it is the box 2 inches by 4 inches follow your hydrallic hoses and the plug is on the front 4 sided guessing probably14mm wrench. Maybe Vic or someone with more knowledge can jump in an give you threads etc. Close to brake peddle on mine.Good luck handy

 

[Greg]

Thanks Handyman, Location for the hydraulic block I have. I'm looking for the plug to return the hydraulic line from the loader control valve.