2015 l3901 tlb

[Rburke65]

Hello gurus! There's a local guy who is trying to sell his 2015 L3901HST with Kubota loader and back hoe with a thumb. 140 hours. $22,500. What do you think.....what should I be aware of if I go look at this. Right now I have a 1979 L245DT with a loader and a Woods mower that a neighbor is interested in buying. 5 acres plus. I have another mower. Ive always wanted a hoe.....don't need it....but hey.....there are lots of things we don't need. Thanks guys.....gals.

 

[Rburke65]

Re: 2015 l3900 tlb

No one with agh ought or advice? ......please....

 

[lescarpentier]

Re: 2015 l3900 tlb

No one with agh ought or advice? ......please....

No matter how you look at it that is definitely a good deal on a low hour tractor and a huge savings over a new one.

 

[Rburke65]

Re: 2015 l3900 tlb

Lescarpnter.....Thank you for posting a response. I haven't been in the market since...1982 and I was just looking for some advice. Thanks again.

 

[Cathy Liebchen]

Re: 2015 l3900 tlb

that is a very good deal. backhoe is one of those things you will either use a lot, or realize it was easier to just hire it out. Around here there are a lot of idle backhoes looking for cheap work at $50 an hour no minimum. We calculated we would have to use one over 100 hours to break even, and taking it on and off is a hassle if you use rear implements a lot

 

[Mike.O]

Re: 2015 l3900 tlb

I'd say great deal

 

[Ridger]

That sounds like a good deal to me. Tractors are worth what someone is willing to give. A good place for comparison pricing are websites like Tractorhouse.com or Fastline.com.

 

[fendley]

Re: 2015 l3900 tlb

that is a very good deal. backhoe is one of those things you will either use a lot, or realize it was easier to just hire it out. Around here there are a lot of idle backhoes looking for cheap work at $50 an hour no minimum. We calculated we would have to use one over 100 hours to break even, and taking it on and off is a hassle if you use rear implements a lot

On my L3901 with BH77, the BH comes off easier than putting on the 3PH parts.