2 inch ball receiver for LP Quick Hitch

[XSFMED18D]

Hello,
I am waiting to take delivery of a B2650 and figured I would get some of the implements or attachments I'd like ordered while I wait so we can be ready to roll once the tractor shows up.

I need to pull a log splitter and a wood chipper out to my wood piles. I have done a search on OTT about receivers, either 3 pt or bolted to the drawbar. I think I'd like to have a 3 point attachment with a receiver on it but I have read that some have issues with the LP quick hitch. Something about the top pin not fitting.

So, does anyone have one of these that works with the LP quick hitch from the get go, that doesn't require pulling out an angle grinder to make it work?

Thank you

 

[cerlawson]

Not all Category 1 quick hitches are the same. Mine is 21-1/8" between hooks which fits all except one attachment. I'd check this out with the stuff you have or are getting to be sure you have the right size Quick Hitch.

 

[BAP]

I use one of these that I bought at my local Tractor Supply. It has 2 positions for the top pin so it can be adjusted to fit your quick hitch. I have a Woods brand quick hitch on my B2920. I use the receiver to move my trailers around.

https://www.tractorsupply.com/tsc/product/countyline-trailer-mover

 

[XSFMED18D]

https://www.tractorsupply.com/tsc/product/countyline-trailer-mover

This is the one I am probably going to get. Some reviews say it doesnt fit their QH, and some say it fits perfectly. Tractor Supply is right down the street so if it doesnt fit and I cant make it fit then I'll just return it. Thanks!

 

[BAP]

Mine fits perfectly. My Quick hitch has a top hook that can be adjusted.