I need to replace my controller. Very sloppy linkage and I can't float the bucket. I have read some old threads that recommended an after market replacement that was pretty much plug and play. However the links are not active anymore. Does anyone know which controller would be best?
1630 loader hydraulic controller replacement
- Thread starter SUPER
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I don't know if this is plug and play, as you might need adapters for the ports.
2 Spool 10 GPM Joystick Loader Control Valve w/Float Chief 220957 | Chief | Brands | www.surpluscenter.com
2 Spool 10 GPM Joystick Loader Control Valve w/Float Chief 220957, Chief, 2 SPOOL JOYSTICK LOADER CONTROL VALVE WITH FLOAT Brand new, CHIEFChief,220957,
www.surpluscenter.com
Power Beyond Sleeve Chief Valve 220842 | Valve Parts & Accessories | Hydraulic Valves | Hydraulics | www.surpluscenter.com
Power Beyond Sleeve Chief Valve 220842, Valve Parts & Accessories, POWER BEYOND CONVERSION SLEEVE Brand new, power beyond sleeve for use with CHIEF
www.surpluscenter.com
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
The OEM valve is a bit smaller and IIRC has SAE-06 vs SAE-08 ports so not 100% plug and play. The port layout is the same so a little minor surgery on the mounting bracket and a handful of new SAE to JIC adapters in the appropriate combinations should be all thats needed to hook it into the existing hoses. That assumes the current plumbing is still OEM which may be a bit optimistic.....
You can probably save $30 or so on shipping if you get that same valve from Summit
Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool (Single Float Spool Optional), 11 GPM
This Monoblock Hydraulic Directional Control Valve uses a Joystick, 2 Spools and has a capacity of 11 GPM. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
summit-hydraulics.com
Dan
Last edited: