I have a 1630 FEL on my B7200D. I need to replace the hoses because they are falling apart. Does anyone have a list of lengths for the hoses? I could remove the hoses and measure them to get accurate length but i would like to only take things apart once. Are the fittings just standard 3/8" NPT? I can order single wire or dual wire hoses. What would be better? The dual wire has a high pressure rating but should i use the single wire because it would be more flexible?
1630 FEL Replacement Hoses
- Thread starter ka24deroadster
- Start date
Do you have a local shop that makes hyd lines?
If so I would just start taking off the worst lines and have them made up and replaced.
The ones that have a mate on the other side of the loader just get them to make 2 that way you will have both.
If so I would just start taking off the worst lines and have them made up and replaced.
The ones that have a mate on the other side of the loader just get them to make 2 that way you will have both.
i agree just get them make them and if you have a attwood store they have the longer
hoses and are 4000 psi instead of 2500 and very flexible. have to buy female
adapters as all hoses are male. i did my hoses for much less cost and still going strong
with no probs.
hoses and are 4000 psi instead of 2500 and very flexible. have to buy female
adapters as all hoses are male. i did my hoses for much less cost and still going strong
with no probs.
Big Kahuna
Member
Equipment
Kubota 2000 L3010 HST with Loader ,1992 B7100HST , 1979 B6100E & 2007 F2880
519) 258-2022