Search results

Unless you drained the battery, you have a safety switch problem. Make sure the hydro control pedal is in neutral (sometimes they stick just outside of neutral causing a no start). You may want to jiggle it back and forth with the key in start. You can rule out safety switches by (being very...

Sounds like you might be on to something, even if that isn't the real problem, correcting it should make the condition better. Unfortunately if there is damage inside you can't do a whole lot more than rebuild it. For future reference, make sure that you make the switch over to Kubota Super UDT...

There is an adjustable relief valve on that loader valve, you could pressure test it and ensure that you are within the pressure specification.

The HST is returned to neutral because the pistons in the cylinder block (hydro internals) are spring loaded. The springs put equal force on the swash plate returning its angle to zero. The linkage does not do any more than dampen the shock. If you have a problem with the hydro sticking in...