Search results

Can I use a different size tire on my 4wd tractor?Proper tire sizing/matching on front wheel assist tractors is a function of insuring that the front axle 'lead" specification is kept within acceptable design and operational limits. Front axle lead (or slippage) is necessary on front wheel...

Baby got new shoes today. Here are a few pics. I made adapter plates for the new rims and tires. The l245dt was so hard to find rims for so i made plates so i could use most any Kubota rim. The old rims were in bad shape. The pilot hole and the lug pattern were almost impossible to find. I still...

Installation went a lot better than i thought. The loader came with compression fittings to tap into the hydraulic line. I didn't have any access ti the hydraulics till i tapped in. I torqued everything it works great. I haven't really used it yet but come spring i have lots of stuff planned. I...

Got er done. Had a pinhole in one hydraulic line. After testing everything it all seems good. Here are a few pics. Considering it started out at 9 degrees and is 20 now everything seemed to warm up and work good.

Heres a few pics from what i did today.

Just put most of the loader on. I'll post pics later. Tired. Had a little alignment problem and a few really rough bolts to thread on. Tomorrow i'll put the last bolt on and get ready to tap into the hydraulics. I'll try to keep updates on how it's holding up. 24 degrees right now. Warmest part...

Thanks. I bought it in March of 12. Put a new head gasket on all new fluids and a lot of other parts. I painted it last summer. I'll try to take pics and make comments as it goes. Hopefully just a day or two and it'll be done. I also made new front hub adapters so i can put new rims and tires...

Just got my fel. Bought it from coldwater in wa. state.$2200 delivered. Going to start putting it on tomorrow. Wish me luck.

I bought it in march of 2012. I had to put a new head gasket on.I have a fel due to be delivered any day now. I got it from coldwater tractor in wa. state. Can't wait to get it on. I enjoy my tractor a lot. I also repainted it last summer and put all new decals on.

The threads are for the lug bolts for the new rims. 14x1.5. I did use a 1" end mill to start then had to go to 1/2" after dulling the first one. I finished the second plate with a new 1" carbide end mill. The pilot hole piece will be held with 4 roll pins and then weldedThe large bore holes are...

Here is some pics. They are not perfect but with just a drill press for the tooling it's good enough for me. When spring gets here i'll paint em and put the new tires and rims on.

After researching the lead lag ratios and deciding what size tires i could use i made my own wheel adapters. My front rims were a cobblejob when i first bought it and new rims were too expensive and almost impossible to find anyway. I bought 3/4" steel plate drilled and tapped everything to fit...

The part number for the gasket is 15321-03310. You need to make sure to see if you have any shims also,if you do the part # is 15321-03320. I didn't have any shims in mine but the job wasn't bad at all.I was a bit leary of adjusting the valves but it was not bad either.

I have the I.T. shop manual and a fair amount of information on doing the job. My head gasket and small o-ring will be here wed. I have pics in my profile of the job. I haven't found another way yet of posting pics. Thanks for replying and takin the time.

pulled the head off my l245dt. new one ordered , hopefully this will take care of the antifreeze in the oil. pics in my profile.

The exhaust is white. I'll check with the dealership to get gaskets after i confirm the problem. Thanks for the help. Hopefully i will be able to get it done within a week or so depending on how long it takes to get the parts. She is a beauty and i hope for the best.

I bought this tractor at an online auction. I changed all the oils and filters and am totally a rookie when it comes to diesels and kubotas. I love the tractor and have been doing a lot of work on it. Mostly tires, filters oils etc. I have not used the tractor one time yet. I have ran it off and...

I bought my Kubota A few weeks ago. So far i have changed all the oils and filters. I have tubes for the rear turfs on order along with decals and lug nuts front lugs o-rings for the dipstick . I bumped out a few dings here and there and have kubota orange and some primer ,i still need to get...

I bought my Kubota A few weeks ago. So far i have changed all the oils and filters. I have tubes for the rear turfs on order along with decals and lug nuts front lugs o-rings for the dipstick . I bumped out a few dings here and there and have kubota orange and some primer ,i still need to get...

Would you happen to have a Kubota grill emblem. 6 inches long 1 1/2 inches tall. ?