Search results

I put one in my b6100e and its great...I did had to do a little trimming to the fan shield though.

Before I posted on here I was trying to find a radiator for the mower it came out of and it looks like they have a second small nipple on the bottom of the radiator for that hose.

Thank you

So my d650 does not have a water pump and the flow goes into a nipple on the lower part of the block. The d950 has a pump and it looks like it goes from the lower radiator connection to both the lower block and to the water pump. Curious if this is normal or a special situation for the mower the...

Anyone know the ballpark weight on a complete d950?

very helpful.

I might do the clutch while its out, should I get a 8200 clutch/pressure plate? I looked up the parts and the b6100 with the d650 and the b7100 with the d750 use the same one but it seems like the d950 uses something different.

I might just purchase another radiator and use normal hoses. Those all aluminum radiators are fairly reasonable. I'm guessing I would just buy a 7200 radiator and it would prob bolt in.

Does anyone have a link or some advice on doing an engine swap on a d6100e? I have located a d950 I'm supposed to pickup in a few weeks. I have done many creative engine swaps on cars, boats, trucks, and even recently an 8.1l fuel injected engine with an Allison 5 speed electronic transmission...

I ended up passing on it when I saw the price of the case.

So this tractor is not in front of me but apparently reading this is semi common so I figured you guys might know the answer. It looks like the shaft came loose and hit the filter and cracked the case. Anyone experienced this? Could I buy that section of case and repair it?

The lack of water pump or temp gauge makes me nervous so I'd like to install a temperature gauge. I plan on relocating my hour meter(possibly into the tool kit hole) and then putting the temp gauge in the prominent location the hour meter was in. That said, where should I put the probe for the...

You rock...ordered!

So I'm going to change the fluids in my new to me tractor. I want to flush the trans fluid as it looks pretty rough and I looked up on here: https://www.kubotausa.com/service-support/maintenance-schedules/lubricant-maintenance-schedule That it says utd or super utd2. I found this that shows it...

I was actually looking at that BKT tire. It looks like one of the carlisle tires but cheaper. I was hoping you had the info on one of the truck tires that fit. An AT truck tire would probably do the job perfectly. This tractor will probably only mow and till. Thanks for the links!

I hate to be needy but is that actually whats on the side of the tire? Happen to know brand?

Running an all terrain truck tire would be kind of nice actually and probably do quite well. Happen to know how wide the factory wheel is? Google is returning 10 and 12 but that is a super wide rim to find a truck tire to fit.

I just bought a b6100e that minus a few dings is basically new(259 hours). I'm pretty sure it still has the original tires as they are falling apart(literally crumbling). They seem quite hard to find. I know people go up to 12.5 in the rear but is there another option in wheels and tires that...

What does a 950 with some blowby run? Also which part of northeast alabama? I used to live in Oxford. I have a buddy that goes through Alabama pretty regularly...he's there now. I live in Texas though.

Do you have a complete d950 engine? Looking to upgrade my 6100e one day. What about a 6100e hood in nice shape?