Search results

Today while installing some foam pipe warp to the windshield braces an idea came to me for a cover on the back of the actuator switch, so I gave it a try I think it just may work

Having completed projects # 1 & 2 I moved on to installing a rear LED work light, thanks to the group pointing out that there is a wire taped up under the RR fender I got going on the project and it turned out good, did install an off - on switch

For the most part the chute deflector linear actuator install is done is working as it should https://youtube.com/shorts/pHP5tOM2iHo

Not yet have ideas running thru my mind

Finished up the wiring today except for installing zip ties on the power cable along the tractor frame, otherwise got the split loom installed and everything zip tied in place. Tested the movement of deflector and its good to go, tomorrow its to finish up the linear actuator mounts and then painting

Got some work done on the wiring this AM got the ground in the cab connected and got split loom on the cable to protect it, installed a circuit breaker next to the battery for the power lead and got that installed did a quick connection using wire nits to see if it was functioning as it should...

Yes momentary spring loaded to center off

Got the switch end wiring done and the switch mount done, so its to its to paint the switch mt and feed the wire from the cab to the front of the tractor and make the electrical connections and to finish up the linear actuator mounts

Yep and minor duty to hold the angle in place;)

Finished up the step and its installed and looking good tried it and it just what I needed

Got some finish work done on the step today, kind of rushed the paint curing but installed the non-skid tape and the outer reinforcing edge for the step it also covers the edge of the non-slip so when getting on your boot doesn't tear it lose, tomorrow hope to install the step

Worked on the switch wiring and a switch mount for the linear actuator plan to install the switch on the hydraulic control joystick

The snowblower on the B2601 came with hydraulic lift and hydraulic chute rotation but has a manual deflector on the chute, in the past I have not changed the deflector all the much but the Agri-fabs on the Husqvarna had a cable lever assy that could be used from the tractor seat, so I decided...

I have used bed liner on other things and as you say works good thanks

Thank you for the reply and information

Its a lot thicker than the Kubota floor pan its bolted to

Getting up in the B2601 is a high step so I wanted a step and Kubota offers one but its real close to $100.00 with tax and shipping too much for this old fabricator. So looked at the Kubota step and figured I can do something like that so here it is, just a bit of clean up and into the paint...

Green Bay really, definitely not

I can wait,

That's part of the reason I bought the B2601. last winter I had enough laying in the snow at -10*F changing drive belts :):p So this year no Belts