Search results

Thank you for the info, much appreciated.

Have now solved the issue by making a fitting to go into the filler hole, Not having a lathe, i made out of a 30mm digger bucket pin cut down witch fits the filler hole exactly then drilled a 16mm hole trough the center, Then welded a 1/2" BSP collier on it, then drilled a hole at 45 deg in the...

Hi Wolfman Thanks for a great reply, would you happen to know a part No for the plug with the port connection ? As that sounds a great idea, and dealers are useless this side of the pond for any info !!!! Also if you have a pic for the drain plug in the case on the mid pto cover. Thanks again.

Will try and find out if that is a return pipe. The plug at the lower center of the picture i removed and has a spring in it so must be a relieve valve or something.

Hi Thanks for your reply. They are all metal tubes as in the pics below. Thought there might be a blanked of plug on the case i could put a fitting into but can't see one.

Hi, yes two ports out back and yes holding the lever fully open with a bit of wood !! This works connecting this way but the splitter at full extend or retract locks up like it is getting fed from both ways, so i have to release the lever and reverse the flow, then start again. But by using...

Hi Have checked number got number wrong way round see attached

Yes but they are in steel pipe with no movement so you can't tee in to it.

Has no one fitted a return to tank extra line on this type of Tractor before ? Would love to hear any ideas or suggestions. Thanks

Hi 85Hokie There is a set of remotes which i am using for the pressure side, with the remote operating lever jammed over so there is full flow. But if i use these for the return the splitter works but at full retract or full extend the splitter seems to lock off so i have to reverse the lever in...

Thank you for the welcome, The tractor is a Kubota L3450 II

Hi every one i am New on here. I am trying to run a log splitter on the back of the tractor which is really needs a direct return to tank to operate properly, have temporarily put the return hose in the filler hole but this is not ideal. Is there a plug in the case i can fit a fitting to then a...