Search results

I replaced both the pressure plate and clutch disc (I have the single stage on the left)

I replaced the pressure plate, clutch disc and release bearing. I just find it weird it was working fine before I split the tractor a second time.

Yes, the no drive issue was after the bearing repair. I will try and load the PTO with a brush hog, the FEL was operating with what appeared to be full capacity. I did try in forward and reverse, and neither had full power. I thought maybe my filter was clogged or bad fluid so I switched both out.

What appeared to be happening with the new release bearing I put in was the inside diameter was just a little too large, which allowed it to grab the fork hub and spin. This allowed the whole hub to twist, and the forks to slip by the hub and the pedal to “fall away”. The clutch assembly seemed...

Yes, you have the sequence of events right. It was working with no issues after I replaced the clutch, it was just the pedal not working. The hydraulic shuttle shift was completely operational.

is there any other cause for a slipping clutch besides the linkage adjustment?

I have a L3350 with hydraulic shuttle shift. About a year ago while using my tractor, I lost all power to the wheels, no engine or PTO issues. I replaced my single stage clutch which was worn, and the release bearing. After putting it back together and starting it back up, my clutch pedal...

is there anyway to verify this with a pressure test prior to splitting? Or once I get it split, will the failure of the plate or disc be obvious?

The slow turning wheels are not powerful enough to move anything. The PTO seems to lock in, as it is not free spinning, but just isn’t getting any power. WSM was ordered today, so hopefully I will have it this week. I am assuming any repairs to dry clutch will require splitting the tractor?

pulling power was good, everything was working as it should, and then all of sudden all functions listed were lost.3pt hitch and FEL still work with no issues. I replaced broke spring noted above but no change

The spring did happen to break while this was happening, I will try that first. This is the hydraulic shuttle model. Oil level was good

While running the tractor the other day, I quickly set down the forks while they had a load of about 500 lbs. Afterwards, I lost forward, reverse and PTO. Oddly enough, when I push the clutch all the way in while in forward or reverse, the wheels slowly turn as does the PTO. There is a...

I am buying a 2004 L3130 HST with transmission issues. Not sure exactly what is going on, buying it as is. Worst case scenario if I had to replace the whole transmission, what would I bet looking at for a price on that repair? Thank you.