Search results

Last July I posted about power loss issues on my M6800 and with great help here traced the problem to be with the clutch free play. Made some adjustments to the clutch and the problem went away. All was well until tonight. At the time there appeared to be a couple of places clutch adjustments...

Was not sure how to title this post but have similar issues on several Kubota products. Have 2 ZD326S and one of them 90% of the time the key will not start it so I have to turn key on and jump start the starter with a screwdriver and then use the manual shut off switch to shut it off. The other...

Going on my 5th year with my M6800, and notice something seems different this year with the power. It’s having trouble pulling hills that had no trouble with years previous. Even when mowing hay with disc mower and turn a curve and start up a slight incline it will stall and I have to shift...

Bought a Seal Kit for my BX2230 Front Steering Cylinder after noticing both sides outer seals were leaking after sitting all winter. Got the cylinder tore apart and the tie rods off - the hydraulic cylinder rod itself has a middle seal that is held on by a very stiff clip on both sides of the...

On my M6800 the Woods 1027 FEL Tilt will randomly freeze/lock up, the up and down works fine. At times I can keep working with it and slowly it will reluctantly break free and slowly start working. Other times I can't get it to work at all. One day it may work fine and the next day not...

The ZD326S runs fine on the left tank but cuts out when switched to right tank. I changed the fuel filters and that has fixed this in the past but not this time. Where would be the first place to look for the blockage? It will run for a while then run rough but never dies, I am quick to shut off...

I seen the recent discussion on Kubota Gear boxes but wanted to get my question answered promptly so started a new thread. My ZD326S machine is some 13 years old and just now started having trouble with the gear box leaking oil. Appears to be the bottom of the gearbox so I naturally suspect the...

I bought a new mower deck this year and I am piecing out my old mower deck if anyone needs parts. Let me know what you are interested in. Thanks! It fits my BX2230 Tractor. I have one bearing that keeps going out but other than that it is operational. Make me an offer for the whole mower deck...

Bought this used 2014 RTV-X900 from a dealer that has 300 hours and started the other morning and stepped on the accelerator and nothing, no rev, just idle. Not sure what’s up but first thought the cable broke but after removing floor and looking I’m starting to think something may have just...

Just purchased a used RTV-900X 2014 with 1900 hours. Where can I get a manual? Is there a mileage read out or is it hours only? I was a little taken back when I drove it for the first time and went up a semi steep gravel lane in 2WD and it really bogged down and I had to switch to Low to get up...

Does a person really have to pull the engine to remove the oil pan? I have a leak I need to fix! :eek:

Started cutting hay today with my M6800 and checked all fluids and okay but did have to fill hydraulic fuel about 1/2 gallon until veiwed on dipstick (with FEL all the way up). Cut for about 3-4 minutes no problem and then power started falling off like fuel was being starved. Messed with the...

I have a leaks going on my Woods 1027 Loader on my 2005 M6800 Tractor that has less than 500 hours. The Loader is controlled by a HUSCO 2 spool 5000-8323 Control Valve. I placed a gage on the rear implement connector and opened the rear valve and operated the Loader and the pressure seemed...

My Woods 1027 Front End Loader has started leaking hydraulic fluid at several different connector locations. I thought at first one of my cylinders was also leaking but it is the crimped connection. I thought it kind of strange that numerous locations are leaking and one of the locations is a...

One of my gas tanks is filled to the brim and the other sounds empty? it stops like i am out of gas...i suspect the fuel filter but the tanks have me baffled. Any thoughts?

I have a 10yr old ZD326S that has developed a starting issues. I first thought battery, then cables, and now I'm thinking Starter. It would just click when the key was turned. New battery helped for a while but it soon was back to the same click. Noticed that when it did start and ran......after...