Search results

BY, after reading this again it refreshed my old memory. Yes, after removing a stick I found jammed in shifter works I found the safety switch to be very stiff. It's a plunger style and as the shifter goes into neutral it pushes the safety switch in resulting in "making" the switch. Due to it...

Laflecrp, I'm not familiar with your machine but most filter bowls function the same. When you get the new o-ring in I would "dig" out the old one with a screw driver or pocket knife and dispose of it. Clean out the groove the o-ring seats in and apply a thin layer of grease to the new o-ring...

It's fixed. I've posted this on another thread but here it is again just in case. I’m back to smooth “shuttle shifting” again. My problem of “hitchy” movement from Forward to Reverse has been solved! After finishing a mowing job yesterday I took some time to look closer at what may be causing...

I’m back to smooth “shuttle shifting” again. My problem of “hitchy” movement from Forward to Reverse has been solved! After finishing a mowing job yesterday I took some time to look closer at what may be causing the problem. Below is what took me about an hour to do and hopefully less than 500...

Wolfman, WSM? ________ Service Manual?

your thread is so close to mine I thought it was mine. Mine http://www.orangetractortalks.com/forums/showthread.php?t=30481 is doing the same thing. Can't tell if it's having trouble coming out of forward or going into reverse. Whatever it is, shuttling back a forth between forward and reverse...

I've tried WD40 on linkages but still not smooth as it used to be. It's got 850 hrs on it. Any ideas?