Search results

Looking at a 1991 L2550 in the next couple days. The owner says it needs a new clutch or a clutch adjustment. His reasoning is it engages at the very top of the pedal. I am unfamiliar with the GST transmissions on these. A couple posts said that the clutches are "Lifetime" The clock shows...

I may have other parts off the deck too if they are needed. The deck was shot and welded by the previous owner. Let me know..if the price for the gear box is wacked let me know what you offer.

I have a mid mower gear box and shaft from a deck that was shot. It's off a b7200 60" deck rc60. Looking at prices on eBay. If you need a starting price 300. But I am open to offers. You pay shipping I'll ship UPS or USPs or febex.

I have started having some issues with my b7200. It's very loud at start but everything is tight. It maybe the pump is miss timed (guess right now). It quits out when it gets warm. Eventually it will fall on it's face and start to build too much pressure in the radiator (wistle, overflow...

Yea should be simple enough to do the crank bearings and rings/ hone it. Didn't think of doing a leak down that other day

Did a compression check the other day on my b7200 and it was low in the front two cylinders (250-275), it did have a chance to cool off some but was still warm. Ran ok once warm, but was extra loud and hard to start cold (65degree garage) found some valve marks on the piston in front and in...

Thanks. Was seeing if anyone's had good luck with like tsc 303 in the hst too, Kubota wasn't open yesterday

Morning. I have been looking around and found a couple conflictingnthings on fluids figured I would ask. Oil is 10w30 HD.? The HST shares with the the rear diff?? So they are udt? Where are these screens on the tractors that should be cleaned. I had to replace the rear diff casing someone bfoke...

So is rod 180supposed to be bent with a brace welded in?

Thanks Much! Appreciate all the help thus far.

Not sure on this. I just got this to replace the one I was borrowing from a friend. Got it for a a little over 1k. Replaced some of the fuel lines, filter housing ect, hydraulic pump seal to get it all running good, adjusted the valves to quite it down, and runs great. Keeps up with my...

Hmm don't like that idea. Now on the bracket forward does not bottom out the bracket lIke reverse does, it hits the floor pan. What steps should I take to confirm this on the hst control.

So I played with the pedal some and it very obviously doesn't reach the full out in forward. Reverse does, the linkage stopping the reverse. Forward hits on the foot rest plate. Can the three bolts securing the pedal be removed and rotate the pedal so it is positioned like 120 degrees (one hole...

Thanks for the info. I think I found a page that helps. Great link!

I have a B7200 HST 4x4 that for some reason just is dog slow going forward vs going in reverse. The peddle going forward does not have as much movement as reverse. Is there some adjustment? I have a new filter I will put on but wanted to see if there is something I need to look at or adjust...

I have a b7200 with a belly mower that is shot. Found a couple localish... Question is what is the difference between a rc60-72 and an rc60-82h. Will the 82h work with mine?

Sweet thanks! Any idea how a 72" would work or just not enough power?

Hey guys I know the b7200 listsa 48 and 60 but wondering if a b72-29 will mount to the bottom and run. Second what should the valves be adjusted to I haven't seemed to find that in a quick search.