Search results

While using my L2800 with a BushHog BH6 the temp gauge gets to the red within a few minutes of cutting. Here is what I've done: Replaced radiator. Replaced fan belt and it is tight. Replaced water pump. Replaced thermostat. Checked the oil and it is not milky and it is clean. Tractor...

Ran a combustion leak test and the fuild stayed blue. Ran a static pressure test and went to 13psi and within 4 min the psi dropped to 10psi. Ran a dynamic pressure test and there was no immediate or rapid pressure build up. I then manually operated the pump to 13psi. After about 5 min the...

Roger that sir. I just purchased this: Mityvac MV4560 Radiator/Cooling System and Pressure Test Kit https://www.amazon.com/dp/B003V9L05G/ref=cm_sw_r_cp_apa_i_iOwIDbS34NHK3 What is the pressure threshold I should look for?

Under the cap is smooth. Should I buy a new cap just to make sure? Does a bad cap mean that you loose pressure?

Bruce no issue at all starting the tractor it cranks fine. Also no white smoke out of exhasut. Have not tried pressure check just yet. Is there a kit on Amazon you recommend sir? I just purchased the combustion leak test kit online. Will be able to run that test in three days.

Took the radiator out and cleanded it with a degreaser and washed it off. Ran a radiator flush cycle through. Added colant and ran the tractor. Got hot in just a couple of minuites. The two radiator hoses are running 160 tempature. Took the radiator cap off and in seeing bubbles. Not a...

Took the radiator out and cleanded it with a degreaser and washed it off. Ran a radiator flush cycle through. Added colant and ran the tractor. Got hot in just a couple of minuites. The two radiator hoses are running 160 tempature. Took the radiator cap off and in seeing bubbles. Not a...

Should I use a degreaser and a hose to spray the radiator? The tractor is truly getting hot the overflow tank is bubbling and liquid is coming out of the drain tube from the overflow tank if you run it long enough. Should I run the tractor with the radiator cap off to see if bubbles are present?

Kubota L2800 is running hot and won't cool off. Cleaned radiator with shop air. Fan belt is tight. Replaced water pump. Replaced thermostat. Drained the radiator. Refilled with coolant and distilled water. Made sure radiator fluid was topped off. Then ran the tractor and it started...

What is considered proper tension for the fan belt?

While using my L2800 today I noticed the temp gauge get extremely hot and then coolant was coming out of overflow reservoir hose. Open the hood and cleaned out the radiator with shop air. Tightened the fan belt as it had a little slack in it. Made sure radiator fluid was topped off. Then ran...

So the issue to the tractor running hot was a loose V Belt. Once I adjusted the tension to make it tighter that fixed the issue of overheating. The water pump and the fan started to operate at the correct speeds and the temperature gauge now displays a much cooler operating temperature.

Had to remove the rubber water pipe to get better access to the bolts. Once that was done was able to get access to remove the bolts!

I'm trying to replace a thermostat in a Kubota L2800 tractor. Do I remove the top two bolts that are on the housing next to the rubber pipe? I tried loosing the bolts and they are not moving at all. Thanks

When running my Kubota L2800 tractor with a bush hog implement the coolant gauge gets all the way into the red zone. When I pop the hood sometime the coolant overfill tank is all the way to the fill line. After letting it rest it drops back down to the low line. Other times the coolant overfill...

I have a Kubota L2800 HST 30hp tractor. Looking to buy a rotary cutter to cut grass on 13 acers. The local dears here have the Frontier or Bush Hog brands. Looking at the Frontier RC2060 http://www.muttonpower.com/p-9334-frontier-60-rotary-cutter-rc2060.aspx or the Bush Hog BH6...

Currently have a Kubota L2800 with a FORD 74" FLAIL MOWER. The property is 13 acres. It is a horse farm so it is all cleared and all grass. The grass gets very thick here in South Carolina during the summer time. We have to cut once every two weeks. There are no sticks or other types of debris...

Bought a used L2800D a year ago and had it serviced with 250 miles on it at a shop. The work report had them changing the engine oil, oil filter, fuel filter, air filter, hydraulic fluid, hydraulic filters, and front axle oil. A year later and now I have 280 miles on it. I would like to know...