Search results

This unit is used for snow, so there is never a load on the trans well shifting gears, the sudden engagment of the clutch is when switching from forwArd into reverse and so forth. Well hitting the ***8220;+***8221; on the range selector and would be in your m105x it is a hard engagment. I was...

The unit has 1045hrs, is a 2010. Power shift trans, The dealer has the unit and has told me the problem is internal... not sure what to beleive. I guess the clutch is elecrtic over hyraudlic Does this seem right? Thanks

I have a m135x, we brought it to the dealer as the shift was very abrupt, the clutch would jump suddenly... they did a bunch of tests and came up with the factor of it needing to be spilt and the clutches redone. They said it needed an update in the trans, quoted me around $15k to complete...

i have recently purchused a 2010 m135x, i also run a m108x in our fleet. i notice the clutch seems to feel much different... it starts to grab about 2" from the top of the pedal when re engaging the clutch what kind of clutch is in this model of tractor? are they the same as the m108? and...

Well back to the drawing board! Put it all back together and still leaking fuel.... Ughh. Gunna pull it apart now and send the injectors in to be bench tested, at this point im really hoping for one to be broken and i can just replace it and all new orings

Well i beleive i found the problem! Opened up the valve covers and foubd the return line bolt going into the head lose (very lose). So poor workmanship ha proven to be the issue again

Also do you know the torque specs on the return line bolts and injector lines?

Which is the WSM? You dont think the seal betweens the pump and housing could allow fuel through? Im no expert on these kubota engines, done mutiple injector set on duramax diesels

Supposed to be new pump, I was thinking they maybe have forgot or i stalled a oring seal wrong on the pump, Im not to sure what u mean by injector seats... If it matters this is a common rail system. The tractor runns very nice

Bought at a asis auction.... The dealer that worked on it did the most lazyiest ways, bending the steel mesh instead of taking it off (5 easy bolts) cut the a/c compressor mount (another easy one bolt) and when replaced the starter the just bent the start protector down and left it. Seems...

Is there anyway to tell if thats the problem? Ive been on tge phobe with mutiple dealers and tgey were saying it could be a seal at the injection pump or a high pressure injection libe running throught the valve cover

I have a 2008 m108x with 500hrs on it, i just bought it and i came to realize that there is fuel leaking into the engine oil. I called the dealer that sold the machine oringally and in april the installed a injection pump amd injector. They did a horrible job amd did everything half ass. What...