Search results

Anyone ever find the common sizes for this transmission? I imagine most if not all seals have a cross reference to a major seal manufacturer. I need axle seals, transmission input seal, brake seals, one side needs brake work, atleast a lining. I'll do any bearings that look like they need...

I sure din't want to pay $300 to $500for a new starter. This is what I did. I bought a similar type starter, not a gear reduction unit. I bought it for a B1550 , B1750, universal diesel. Or a starter for a D750 or Z500 engine. Kubota part number 15231-63012. This is not a bolt in, but...

Might split the transmission apart while I replace the rear main seal. I have some screechy bearing noise at times. My main body gasket is leaking slowly too. The one between the gear box casing and the rear axle housing, IF I worded it right. Anyone know where I can get seals and shaft...

Anyone make camshaft plugs for a L175 with a Z750 engine. I hear this is a common cause of low oil pressure. I need to check my oil pressure. I assume it is low because the oil pressure switch was broken off. My guess it was done so it could be sold. I cut open the old oil filter and poured...

Is the rear main seal a wax rope type, or typical rubber lip seal. I can imagine this is probably somewhat of an indepth job. Splitting the bellhousing open will need to be done. Do I have to drop the pan to replace this seal too. I removed the starter an saw oil in the starter and on the...

My starter on my L175 is shot. 1/2 the commutator is roasted on it. I noticed the newer kubota models like the D750 series of engines seem to be about the same dimentionally. Same rotation, same power, same tooth count. What I also notice is new starters for these newer models are 1/2 the...