Search results

Thanks all, it looks like when it cools off in south Texas I may be taking the wheel and fixing it.

Image pretty much tells the story. I know there are several seals in there. I'm just curious if you can tell which seal is leaking by this image. Also wondering level of effort to do this. I've done brakes and bearings on a car many times and I'm thinking this is similar. Tractor is an L2600DT

Well, I did get the call saying they are crediting my account because they don't have the grill guard and can't get it. I guess I'm back to square one, but at least I have a number and can search for it occasionally and maybe one will show up somewhere.

Thanks to all. Finally found the part number (75540-99500) on the Kubota site late Friday with an email assist from Greg German of German-Bliss, who indicated it was a discontinued item. Searched for that number and got two hits - Coleman's and Gold Eagle Direct. Both were same $326.02 price...

Thanks, Clay, I have looked all over Messicks and Colemans and other sites. Do they have products not on the site? Maybe I should email them.

Anyone know the part number for a grill guard for an L2600DT with a FEL? I've been searching all over the place and can't seem to find a guard or a part number anywhere. Thanks

RENTTHIS: Thanks for the info. Tractor does run good and seems not to have been damaged. Like you said people are reluctant to admit and I think it's probably because it is one of those "feeling stupid" moments that no one wants to go on record with. In your case they may worry about having to...

ShaunRH: Yeah, i got the yellow can, red can rule too. I was just in a rush. I've been up to my neck in alligators since march and mistakenly grabbed a dust covered red container for a dust covered yellow container. They are usually not together in the barn, but I had recently moved a lot of...

OK, problem solved. It turns out it was user error. When I went to get one of my yellow 5 gallon Diesel containers to drain the tank into they were both full . . . even though I had just filled the tank a couple days before. In my haste to fill the tank and start shredding I put gasoline in...

Thanks for all the suggestions. I will be working on it this weekend and will let you know what happens. Have not added oil in a while and it is in the middle of the OK zone. My local Kubota dealer service manager told me some things to check too. Talking to him makes me think I need to...

I put in a new fuel filter and checked fuel cap and still no change. It runs for about 10 minutes and then slowly loses power under load and then under no load until it just won't go. Let it sit a while and it rusn again for aobut the same length of time. Any clues would be appreciated. This...

I've got an L2600 with a little over 700 hours on it. I was shredding away last night and then the power seemed to get weak. Turned off the PTO and revved it up and I could go a little ways, but then it would die. I removed the air filter and screen in front of the radiator and nothing changed...

Problem was a clog. Evidently one of the hoses must have got some debris in it when i had them disconnected for the time I was working in the gear box. I guess it took a while for it to go through the system until it found a place to clog. I had checked them before i put them back on. Next...

All the hoses were secure. I took the top of of the gear/transmission area again and cleaned everything out the best i could. Used an air compressor and blew through all the oil paths. I don't know what else to do so i think i'm going to just load it up and take it in. Still, i know it's...

will do tonight. thanks

The valve i'm referring to is inside. The FEL works and there is another valve on the outside that controls it. So, i guess the answer is there is no diverter valve. I just made another repair and this is too much of a coincidence for something to have failed. I just feel like somewhere...

OK, yesterday i took off the cover and checked out the linkage connecting to the valve seems to work OK. What i did notice is the actual Piston-like mechanism seems stuck in the recessed position. It is obviously not getting oil. I"m guessing i have a clog here somewhere. I loosened the...

Thanks for the replies. I've been down with a sinus infection or would have responded sooner. First, I don't know what an FEL valve is and can't find it on the PDF parts diagram I have. I get great service and phone support from my Kubota dealer here and what we're wondering is if i somehow...

DanielD, What did you find was the problem? I'm having a similar problem with my L2600DT. I'm going to change the filter as soon as i get one. I'm wondering if that fixed your problem.

The lift on my Kubota L2600DT stopped working. I had recently taken the cover off of the gears under the seat to replace a high/low shifter part that had broken internally. I've used the front-end loader several times since the repair, but when i needed to use the lift for the 3-point it would...