Search results

  1. P

    TG1860 - Drilling noise when trying to start

    I would say that the bendix on the starter is hung up This is the gear on the starter that engages the flywheel. If you arent mechanically inclined, seek out a small engine repair shop or your local dealer. Or if you have a local electric motor repair shop (a dying breed), they can probably...
  2. P

    flasher unit

    Once I got it running I eliminated the flasher unit. It is not a part of the ignition circuit. I had cleaned the hell out of the ground connections, from the battery to the frame and the motor to the frame. Took the battery leads off, and jumped it with my truck. It ran fine, but the...
  3. P

    Leaky Front Axle Seal Repair Cost

    I did it yself. Its not hard if you are mechanically inclined and have a good set of snap ring pliers. If one is leaking, the other probably isnt far behind.
  4. P

    flasher unit

    Does the flasher unit play a role in the ignition? My BX23TLB is giving me fits with not starting intermittently. Instead of getting the steady ticking it usually does in the run position, none of the instrument lights come on. In the start position, no crank and no sound of the starter...
  5. P

    tail lights not working

    My 2002 BX23 has issues with the lights. Neither the tail lights, turn signals, nor the hazard flashers are working. THe headlights have been wonky, especially after getting wet, but I have replaced the switch and the problem appears to be solved. As for the taillights, I have gone through...
  6. P

    Rtv 500

    Hey all! I searched for the RTV product and couldnt fint any threads. Anyone have one or current on them? I am trouble shooting Dads gas model, it has no power. Even in low range it wont climb hills, or even slopes as it should. It cuts out and dies. I am thinking either water in the fuel...