Search results

Just picked up a FDR 1572 and want to check the gear box oil level. The owners manual states. "Check the oil level in the gear box by removing the plug in the top of the box. Add oil if necessary into the biggest plug at the back of the box. Do not over fill!" This does not clearly explain as...

The seal on my rcr1248 was leaking so I pulled the output cap to replace the seal. So now I need to replace the output cap gasket. The parts diagram https://messicks.com/catalogs/landpride/rcr1248/section-3-blade-drive/gearbox-826-670c-omni shows three different gaskets for that cap. I...

I will be replacing the output seal in a Land Pride RCR 1248. The torque on the castle nut is 450 #s. I want to purchase a impact wrench that can handle this. Looking for some suggestions/recommendations, pneumatic or cordless? Thx Mike

Attached is a photo of a leaking hydraulic cylinder on my bx2357a sweeper. I want to replace the seals, but not sure what seals to order. I find no identifying numbers on the cylinder and don't see a part number in the parts diagram. I think the hydraulic system was a add on, and don't see a...

Just picked up this Bx 2537A sweeper. Found a parts manual, put have not come across a owners or service manual. Also, if anybody has any experience with one of these sweepers your input would be greatly appreciated! Thx Mike

Just picked up a BX2370 and see its got lug nuts and lug bolts on both rear rims. Each located in the same pattern. Any Ideas?

Not sure what size quick release pin for my Land pride RCR 1248. Its 1 3/8" yoke 6 spline. I see pins for sale stating fits most domestic style yokes. Land pride part number 00.02.01-44.5 is not coming up in parts search. Thx for any help.

My neighbor gave me this land pride finish mower that had a sheared cutter blade bolt which he did not want to mess with. I am trying to remove the pto shaft which has what I believe to be a Eurocardan PTO Shaft. The shaft is stuck on and I am not sure which way the collar should rotate to...

I have been looking to purchasing some pin on pallet forks for my B2620 but cannot seem to find a source for them. Any body know where I might find some? Thx Mike M

I am looking at converting to SSQA from current pin on set up. Titian would cost about $550 for 3/8" mounting plate for original bucket and conversion adaptors. Vevor has the 3/8" plate and adaptors for $264. They both appear to look the same. Any input on switching over to the SSQA would be...

I got a line on a used woodland mills bandsaw that i will be taking a look at, any suggestions on problems to look for. Thanks Mike

A couple of years ago after mowing one of our fields I noticed Hyd oil pooling beneath my B2620, Oh "you know what". Ok, its a good thing I kinda like tearing stuff apart, as the tallgrass had wrapped itself around both ends of the propeller shaft destroying the bearing seals. Of course the...

Got all me implements on dolly's now. So much easier to hook up! And put to use some stuff that's been laying around. :giggle:

Anybody else find that the rubber OEM hydraulic hose dust caps for the male ends don't stay on very well? I've been searching for metal caps which we used on the jaws of life hoses, but can't seem to find them. Any ideas out there?

Looking at a 6' foot land plane which is stated to be rated for 25 plus hp tractor. Anybody out there with experience with a setup like this on B2620 ? Thanks

I had 12 yards of gravel delivered for my road. I asked the driver to lay it down at a 2 inch depth. I guess he decided that an 8 plus inch depth would be better. After using my box blade to cut it down and spread it out I ended up with a lot of woopedos. Not having a land plane I came up...

Getting ready for the warmer weather, and working out my custom 3pt forks, sure smells like whisky around here!

Is a $400 fair price for this pin on forklift attachment?

Putting my B2620 back together and the mid front axel drive U joint line would not go onto its drive shaft. A closer look reveled this! Cost of a new U Joint $130 o_O cost of further damage o_Oo_Oo_Oo_Oo_O.

This would also apply to the B2920HST and B2320HST. The Operators Manual P. 65 does not mention removing the drain plug in the clutch housing cover. The Workshop Manual P. S-14 does indicate removing this plug to drain the transmission fluid. This might be common knowledge, but just thought I...